Blog

• Inspecting the lugs or wheel bolts
• Installing new rubber valve stems where applicable
• Mounting the tires
• Balancing the new tires on your wheels
• Tightening the wheel lugs to the manufacturer recommended torque
• Servicing TPMS systems

The Steps to Install a New Set of Tires

1. The vehicle is placed on a mount to lift off the ground.
2. The technician will unbolt the lug nuts on each wheel in a counter clockwise direction starting with the left front so that the wheels are removed from the vehicle. 
3. The tires will then be deflated by unscrewing the valve stem core; if new tires are being installed, the stem in pulled out and a new one is installed.
4. A tire machine removes the tires from the rim.
5. The rims are checked to make sure they are perfectly smooth with no rust or rough patches.
6. To remove rough patches, abrasive pads are used the smooth the inner and outer parts of the rim. Too much damage to a rim will cause an unbalanced wheel. So, if rims are rusted they need to be replaced.
7. Tire bead lubricant is applied to the tire beads and the rim which allows the bead to have the tires sit well on the rims.
8. Using the tire machine, the new tires are installed on the rims.
9. Tires are inflated to their maximum pressure based on vehicle manufacturer specifications and a stem core is installed.
10. Tires will then be balanced and reinstalled onto the vehicle.